Integrated stereo amplifier with twin speaker outs
120W Class G amplification, 20W in class A
On board PSU for rSeries products
CR902 system remote control
Phono input configurable for line/MM
Large ergonomically designed aluminium knob
Low power 0.5W standby
-
Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8Ω, 20Hz—20kHz 120W
Single channel, 4Ω, at 1kHz 240W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.001%
-
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz 5mV
Input impedance 47kΩ + 270pF
Frequency response (ref. RIAA curve) 20Hz—20kHz ± 1dB
Signal/Noise ratio (Awtd) 50W, ref. 5mV input 80dB
Overload margin, ref. 5mV at 1kHz 20dB
Inputs:
Nominal sensitivity 1V
Input impedance 10kΩ
Maximum input 4.6V
Frequency response 20Hz—20kHz ± 0.2dB
Signal/noise ratio (Awtd) 50W, ref. 1V input 105dB
-
Preamplifier output
Nominal output level 900mV
Output impedance 240Ω
-
Headphone output
Maximum output level into 600Ω 4V
Output impedance 1Ω
Load range 16Ω—2kΩ
-
Accessory power output
2.1mm DC connector 6V, 1A
-
Mains voltage 110–120V~ or 220–240V~
Power consumption (maximum) 1kW
Dimensions W x D x H (including feet) 433 x 425 x 100mm
Weight (net) 11.5kg
Weight (packed) 13.2kg
-
Supplied accessories Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
